Overview
Joining long panels is about uniformity along the seam: the blade has to reach temperature across the full length and the table has to press evenly.
A 3000 mm table, a one-piece heated blade and 32 cylinders press together at up to 430 °C; the welded panel can then be rolled on the same machine.
Key features
- 3 m table — one long panel in a single pass
- One-piece heated blade heats the whole seam at once
- 32 cylinders press evenly across the table
- 430 °C ceiling for fluoropolymer sheet
- Welding, joining and rolling in one machine
Typical workpieces
Machine photos
FAQ
What is the maximum welding length?
3000 mm, depending on the model. Size the machine on your longest workpiece.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.