Overview
Type A is the model we ship most: four lengths — 1.5, 2, 3 and 4 m — welding thickness up to 25 mm, rolling diameter from 250 to 500 mm.
Welding and rolling happen on the same machine. A heating plate fuses both edges, four pneumatic points advance them in balance, and the panel closes on its own melt — no rod, no chamfering. The welded panel is then rolled on the same table.
Key features
- No rod, no chamfering — the seam is formed by the panel itself
- Four-point balance keeps both sides at the same melt state
- 7-inch touch screen, manual and automatic modes
- 540° cantilever control arm
- Removable support arms fold away when not in use
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 25 mm. Above that, step up to the next model in the range.
What is the maximum welding length?
1500 / 2000 / 3000 / 4000 mm, depending on the model. Size the machine on your longest workpiece.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
≥ 250 / 300 / 400 / 500 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.