Overview
Type D is the manual version: 0.2 t, fully mechanical clamping, only a 380 V line needed — loss of power or air does not stop the clamping.
Sheet up to 5 mm and cylinders from 150 mm, pressed by handwheel — for site repairs, trials and workshops without an air supply.
Key features
- 0.2 t — one person can move it
- Mechanical clamping with few failure points
- No air supply needed
- Fills the gap for 5 mm sheet and 150 mm cylinders
- Four-point balance keeps the seam flat
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 5 mm. Above that, step up to the next model in the range.
What is the maximum welding length?
1500 mm, depending on the model. Size the machine on your longest workpiece.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
≥ 150 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.