Overview
This series links welding and rolling into one sequence: heating, advancing, pressing and rolling run from stored parameters — no second operator to lift and align, no manual rolling.
The automatic rolling device lets one person run the whole cycle; the strap-balance system keeps the roll even. A new cylinder size is a parameter change.
Key features
- Automatic welding from stored parameters
- Automatic rolling device — one operator
- Motorised strap-assisted rolling with balance system
- 7-inch touch screen with stored parameters
- 540° control arm and removable arms (options)
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 25 mm. Above that, step up to the next model in the range.
What is the maximum welding length?
1500 / 2000 / 3000 mm, depending on the model. Size the machine on your longest workpiece.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
≥ 250 / 300 / 400 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.