Overview
Type C packs the same principle into a 0.3–0.5 t frame: 15 mm welding thickness, rolling from 200 mm diameter, only 1.1 m wide — a pallet truck can move it.
It is aimed at small batches and thin-wall cylinders, where hand welding still produces crooked, leaking work.
Key features
- 0.3–0.5 t — moves as a unit
- 1.1 m wide, fits against a wall
- 15 mm sheet covers thin-wall cylinders and boxes
- Four-point balance keeps the seam flat
- 4-inch touch screen with stored parameters
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 15 mm. Above that, step up to the next model in the range.
What is the maximum welding length?
1500 / 2000 / 3000 mm, depending on the model. Size the machine on your longest workpiece.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
≥ 200 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.