Overview
Type B is built for thick sheet and large cylinders: 50 mm welding thickness, 3–6 m welding length, rolling diameter from 400 to 600 mm, 2–3.5 t machine weight.
A thickened table and a heavy one-piece frame keep a 6 m panel steady, and the control console stands apart from the frame so it does not get in the way when loading.
Key features
- 50 mm welding thickness for thick-wall tanks
- 6 m panels welded in one pass — fewer seams
- Heavy frame and thickened table keep long panels straight
- Independent console for thick-panel handling
- Motorised strap-assisted rolling
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 50 mm. Above that, step up to the next model in the range.
What is the maximum welding length?
3000 / 4000 / 5000 / 6000 mm, depending on the model. Size the machine on your longest workpiece.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
≥ 400 / 500 / 600 / 600 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.