Overview
A flange ring is the hard part: welded in short sections by hand, it ends up with many joints, and a 70 mm edge burns through easily.
This model uses eight welding stations in one setup; the hot plate fuses the flange and the wall together, and pneumatic pressure closes the joint.
Key features
- Eight stations in one setup
- 70 mm flange edge for common duct and tank flanges
- No rod, no chamfering, no grinding
- Four-point balance for a consistent ring
- 7-inch touch screen, manual and automatic modes
Typical workpieces
Machine photos
FAQ
How thick a sheet can this machine weld?
Up to ≤ 15 mm. Above that, step up to the next model in the range.
What are the key dimensions (rolling diameter / flange edge / pipe range)?
70 mm. Refer to the specification table for the exact model; a sample weld can confirm it.
Which plastics can it weld?
PP, PE, PVC, PVDF and ABS thermoplastic sheet. For PFA and FEP choose the dedicated PFA models.
How is this different from hand welding?
The seam is formed by the panel's own melt — no filler rod, no chamfering. Four-point pneumatic balance keeps both sides at the same melt state, giving a flat, leak-free joint.
Service
Send a sample panel: we run it on the same model and send the video back. 12-month warranty, common spares dispatched within 48 hours in China.